For Business  >  Saving Energy  >  Energy tools & information  >  Multi-family volumiser

Multi-family volumiser

Use this form to calculate average natural gas consumption for Multi-family Buildings only

Sq. Feet
Do NOT include any commercial space or parking areas. Enter numeric values only. If floor area is unknown, leave blank, and computer will use an average value.

Enter numeric values only. If gas data is not known, you may leave entry blank.
Provincial Tax       Federal Tax

Natural Gas is used in the following applications at this building:

A. Must be checked

Gas fired water tanks or boilers used to heat water for showers, laundry, dishwashers, etc.
B. Check at least 1 or more from Part B

Gas fired boilers are used as the major energy source for heating the building.

Gas fireplaces are installed in at least 50% of the suites.
C. Check any from Part C that are applicable to this building

Corridor make-up air is heated directly by gas, or via the heating boiler.

Indoor or outdoor pools, heated directly or indirectly by natural gas.

Gas-fired cooktop, range and/or oven is installed in at least 50% of suites.


Notes & Disclaimer

  1. This information is based on natural gas heated Domestic Hot Water; such as gas fired water tanks or boilers used to heat water for showers, laundry, dishwashers, etc. If your DHW is NOT heated with natural gas, contact Terasen for a consumption estimate.
  2. This information is based upon a survey of more than 200 Multi-family buildings, comprising nearly 14,000 suites and 12,000,000 square feet of floor space. Information is based on averages computed from the data derived from those buildings.
  3. Consumption within ± 10% of these values should still be considered within average ranges. Data should not be used to predict or forecast consumption. It is intended as a comparison guide only. Consumption and cost values have been rounded.
  4. If your consumption is much greater than average, you should be looking at ways to reduce your consumption. Contact Terasen Gas to discuss your application, or refer to our website for energy conservation tips and suggestions.
  5. Prices and costs shown do not include any taxes and/or franchise fees. Rate 5 & 25 prices include Demand Charges. Transportation rates (R23 & R25) are estimates only. Transport commodity prices are set by marketers, not by Terasen Gas.
  6. Do not look at individual component uses in isolation, as energy components may be interactive and cumulatively dependent.
  7. The calculations here-in are believed to be accurate, however Terasen Gas assumes no liability for errors or omissions.

Enter numeric data in the Text Boxes, and make selections from the Drop-down boxes to enable the program to calculate estimated consumption.

* Data is required

Select your region

Select your region

Help us better serve you with offers, promotions, rates and services relevant to your area.

View offers, promotions, rates and services relevant to your area every time you visit our web site. This setting will be saved in your computer if you have cookies enabled.

SET YOUR REGION

For your convenience

Select your region to view offers, rates and other information for your area throughout our site.

ACCOUNT LOG IN

Upgrade Message

This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser or Internet device.